6. Pull-Up Bar Rope 5 pts

Mechanics · Kinematics, Constraints, Statics

A rope pulled at constant rate over a horizontal bar drags a weight across a frictionless floor; find its speed, acceleration, and the angle at which it lifts off.

Solution by Jaan Kalda.

Part i) (1 point)

Place the bar at the origin of a coordinate system where xx is the horizontal distance from the bar to the weight along the floor, and HH is the height of the bar above the floor. The length of the bar-to-weight rope segment is

L=x2+H2,sinα=x/L.L = \sqrt{x^2 + H^2}, \qquad \sin\alpha = x/L.

Method 1 (inextensibility / velocity projection). Since the rope is inextensible, the velocity components of its two endpoints along the rope direction must match: whatever rate one end recedes from a point on the rope, the other end must approach it at the same rate. The puller’s hand pulls the rope along its own direction at speed vv, so the rope shortens at rate vv. The weight moves horizontally toward the bar at speed uu; its velocity component along the rope (which makes angle α\alpha with the vertical, hence angle π/2α\pi/2 - \alpha with the floor) is usinαu\sin\alpha. Equating:

usinα=v    u=vsinα.u\sin\alpha = v \implies \boxed{\,u = \frac{v}{\sin\alpha}.\,}

Method 2 (implicit differentiation). Differentiating L2=x2+H2L^2 = x^2 + H^2 with respect to time:

LL˙=xx˙.L\dot{L} = x\dot{x}.

With L˙=v\dot{L} = -v (the segment shortens at constant rate) and sinα=x/L\sin\alpha = x/L:

x˙=Lvx=vsinα,\dot{x} = -\frac{Lv}{x} = -\frac{v}{\sin\alpha}, u=x˙=vsinα.u = |\dot{x}| = \frac{v}{\sin\alpha}.

Grading (Method 1)

  • Recognising that the velocity components of the rope endpoints along the rope direction must match (rope inextensibility): 0.4 pts
  • Identifying the projection usinαu\sin\alpha for the weight’s velocity along the rope: 0.3 pts
  • Final answer u=v/sinαu = v/\sin\alpha: 0.3 pts

Grading (Method 2)

  • Setting up L2=x2+H2L^2 = x^2 + H^2 with L˙=v\dot{L} = -v: 0.3 pts
  • Correctly differentiating to obtain LL˙=xx˙L\dot{L} = x\dot{x}: 0.4 pts
  • Final answer u=v/sinαu = v/\sin\alpha: 0.3 pts

Part ii) (1 point)

Method 1 (continuing from LL˙=xx˙L\dot{L} = x\dot{x}). Differentiate again, with L˙=v\dot{L} = -v constant (so L¨=0\ddot{L} = 0):

L˙2=x˙2+xx¨,\dot{L}^2 = \dot{x}^2 + x\ddot{x}, x¨=v2x˙2x=v2u2x.\ddot{x} = \frac{v^2 - \dot{x}^2}{x} = \frac{v^2 - u^2}{x}.

Since u2>v2u^2 > v^2, we have x¨<0\ddot{x} < 0: the weight accelerates toward the bar. With u=v/sinαu = v/\sin\alpha and x=Htanαx = H\tan\alpha:

x¨=u2v2x=v2(1sin2α)/sin2αHtanα|\ddot{x}| = \frac{u^2 - v^2}{x} = \frac{v^2(1-\sin^2\alpha)/\sin^2\alpha}{H\tan\alpha} x¨=v2Hcot3α.\boxed{\,|\ddot{x}| = \frac{v^2}{H}\cot^3\alpha.\,}
  • Correctly differentiating an incorrect result from the previous part: 0.5 pts

Method 2 (direct differentiation of u=v/sinαu = v/\sin\alpha). The angle α\alpha changes in time as the weight slides; introduce ω=α˙\omega = -\dot{\alpha} (positive as α\alpha decreases). The weight’s position is x=Htanαx = H\tan\alpha, so its speed is

u=x˙=Hcos2αα˙=Hωcos2α.u = -\dot{x} = -\frac{H}{\cos^2\alpha}\dot{\alpha} = \frac{H\omega}{\cos^2\alpha}.

Combined with u=v/sinαu = v/\sin\alpha:

ω=ucos2αH=vcos2αHsinα.\omega = \frac{u\cos^2\alpha}{H} = \frac{v\cos^2\alpha}{H\sin\alpha}.

Differentiating u=v/sinαu = v/\sin\alpha with respect to time:

u˙=vcosαsin2αα˙=vωcosαsin2α.\dot{u} = -\frac{v\cos\alpha}{\sin^2\alpha}\dot{\alpha} = \frac{v\omega\cos\alpha}{\sin^2\alpha}.

Substituting ω\omega:

x¨=u˙=vcosαsin2αvcos2αHsinα=v2Hcot3α.|\ddot{x}| = \dot{u} = \frac{v\cos\alpha}{\sin^2\alpha}\cdot\frac{v\cos^2\alpha}{H\sin\alpha} = \boxed{\,\frac{v^2}{H}\cot^3\alpha.\,}

Grading (Method 1)

  • Differentiating LL˙=xx˙L\dot{L} = x\dot{x} to obtain x¨=(v2u2)/x\ddot{x} = (v^2 - u^2)/x: 0.5 pts
  • Substituting uu and xx to obtain final answer a=(v2/H)cot3αa = (v^2/H)\cot^3\alpha: 0.5 pts

Grading (Method 2)

  • Introducing ω=α˙\omega = -\dot{\alpha} as the angular rate of the rope direction: 0.2 pts
  • Relating the weight’s speed to ω\omega: u=Hω/cos2αu = H\omega/\cos^2\alpha: 0.2 pts
  • Deriving ω=vcos2α/(Hsinα)\omega = v\cos^2\alpha/(H\sin\alpha) from u=v/sinαu = v/\sin\alpha: 0.2 pts
  • Differentiating u=v/sinαu = v/\sin\alpha to obtain u˙=vωcosα/sin2α\dot{u} = v\omega\cos\alpha/\sin^2\alpha: 0.2 pts
  • Substituting ω\omega and obtaining final answer a=(v2/H)cot3αa = (v^2/H)\cot^3\alpha: 0.2 pts

Part iii) (3 points)

While the weight is on the floor, the only horizontal force on it is the horizontal component of the rope tension TsinαT\sin\alpha directed toward the bar. Newton’s second law in the horizontal direction:

Tsinα=Mx¨=Mv2cos3αHsin3α,T\sin\alpha = M|\ddot{x}| = \frac{Mv^2\cos^3\alpha}{H\sin^3\alpha}, T=Mv2cos3αHsin4α.T = \frac{Mv^2\cos^3\alpha}{H\sin^4\alpha}.

Vertically, Tcosα+N=MgT\cos\alpha + N = Mg, where NN is the normal force from the floor. The weight lifts off when N=0N = 0, i.e., Tcosα0=MgT\cos\alpha_0 = Mg:

Mv2cos4α0Hsin4α0=Mg,\frac{Mv^2\cos^4\alpha_0}{H\sin^4\alpha_0} = Mg, tan4α0=v2gH,\tan^4\alpha_0 = \frac{v^2}{gH}, α0=arctanv2gH4.\boxed{\,\alpha_0 = \arctan\sqrt[4]{\frac{v^2}{gH}}.\,}

Grading

  • Identifying that the only horizontal force on the weight is TsinαT\sin\alpha: 0.3 pts
  • Writing Newton’s second law horizontally: Tsinα=Mx¨T\sin\alpha = M|\ddot{x}|: 0.3 pts
  • Substituting the expression for x¨|\ddot{x}| from part ii): 0.2 pts
  • Isolating TT to obtain T=Mv2cos3α/(Hsin4α)T = Mv^2\cos^3\alpha/(H\sin^4\alpha): 0.2 pts
  • Correctly setting up the vertical force balance Tcosα+N=MgT\cos\alpha + N = Mg: 0.5 pts
  • Correct lift-off condition N=0N = 0, i.e., Tcosα0=MgT\cos\alpha_0 = Mg: 0.5 pts
  • Algebraic manipulation to tan4α0=v2/(gH)\tan^4\alpha_0 = v^2/(gH): 0.5 pts
  • Final answer α0=arctanv2/(gH)4\alpha_0 = \arctan\sqrt[4]{v^2/(gH)}: 0.5 pts